DEADTIME_d - Dead Time PWM with variable duty cycle
Connection Diagram:
| D |
| HIGH |
| LOW | ||
| M |
| Connections(4) | Position | Remark |
| M | Bottom | Connect to a MNAME block for getting parameters from a .Model parameter list |
| LOW | Right | Low-side output, connect to the synchronysing Mosfet |
| HIGH | Right | High-side output, connect to the switching Mosfet |
| D | Left | Duty Cycle |
| Parameters(2) | Default | Remark |
| DeadTime | 1u | Dead time between high and low output |
| F | 100k | Switching frequency (Hz) |
| Function | Control block for a synchronous SMPS | |
| Special | The input on the left is the duty cycle (0..9) | |
| Note | Be carefull when specifying the dead time. It should be within the switching period | |
| Status | Standard | |
| Select from | Components\Library\Control\SMPS | |
See also
ConstantPWM, DeadTime, PWM,