IPM -
Connection Diagram:
| L1A |
| |
| L2A | SHAFT | |
| L3A | THETA | |
| Connections(21) | Position | Remark |
| THETA | Right | |
| SHAFT | Right | |
| L3A | Left | |
| L2A | Left | |
| L1A | Left |
| Parameters(8) | Default | Remark |
| Lq[H] | 800u | Winding inductance per phase in the q axis |
| Ld[H] | 500u | Winding inductance per phase in the d axis |
| Ke[Vpeak/(Rad/s)]]=[Nm/A] | 0.05 | Torque / back emf constant in [Vpeak/Rad/s] or [Nm/A] |
| JR[Kgm2]] | 100m | Rotor inertia |
| RS[ohm] | 10m | Winding resistance per phase |
| Rm[ohm] | 1000 | Main winding loss modeling resistor (usually in the order of 500 to several kilo ohms) |
| polepair[.] | 4 | Number of pole pairs |
| Friction[Nm/Rad/s] | 1m | Friction of the bearing in Nm per Rad/s |
| Function | ||
| Status | Standard | |
| Select from | Components\Library\ElectricalMachines\PMSM | |
See also
BLACM, LdLq, LdLqFile, LdLqKT, LinearPMSM, PMSM, PMSM9phase, PMSMq, PMSM_DQ, PMSM_DQdq,