SinglePhase - Brushless DC Machine Single Phase
Connection Diagram:
| T | ||
| L1 |
| SHAFT |
| L2 | ||
| M |
| Connections(7) | Position | Remark |
| T | Top | |
| SHAFT | Right | |
| M | Bottom | Model parameters |
| L2 | Left | |
| L1 | Left |
| Parameters(8) | Default | Remark |
| Friction[Nms/Rad] | 1m | Rotor friction [Nm / (Rad/s) ] |
| Inertia[]Kgm2] | 1m | Rotor Inertia [Kgm2] |
| StatorInductance[H] | 10mH | Stator winding inductance [Henry] |
| Rs[Ohm] | 1 | Stator winding resistance [Ohm] |
| InitialAngularSpeed[Rad/s] | 0 | Initial angular speed of the machine [Rad/s] |
| np | 2 | Number of pole pairs [.] |
| K | 0.1 | Torque / Back Emf Constant [Nm/A] or [Vs/Rad] |
| InitialAngularPosition[Rad] | 0.753 | Initial angular position of the rotor in Radians |
| Function | The single phase machine has only one winding and one rotor magnet. | |
| Special | Depending on the initial angular speed or initial angular position, the machine rotates in either clockwise or anti-clockwise | |
| Note | Either the initial angular position or the initial angular speed have to be non-zero | |
| Status | Standard | |
| Select from | Components\Library\ElectricalMachines\Brushless | |
See also
BLDCM, BLDCMdelta, BLDCMwye, BLDCM_FEM, BLDCM_FEM_StarWye, Brushless, BrushlessDC, BrushlessDC_Monitor, BrushlessDC_NamePlateParameters, CommutationSequence120, EC, wye,